3 Combo Wheel Lock Operating Instructions- UL Listed Group II
3 Combo Wheel Lock
- Various Models : Optional
This lock is an option on most safe models.
OPERATING INSTRUCTIONS:
1. Turn dial to the LEFT [counter-clockwise]
1st number to pass arrow 3 times
and stop on the 4th time.
2. Turn dial RIGHT [clockwise]
2nd number to pass arrow 2 times
and stop on the 3rd time.
3. Turn dial to LEFT [counter-clockwise]
3rd number to pass arrow 1 time
and stop on the 2nd time.
4. Turn dial to RIGHT [clockwise]
Turn slowly until dial reaches
positive stopping point.
Turn handle or key to open safe.
If locking bolt does not retract after you have dialed the combination to open. It is possible the lock was jarred during shipment. Repeat opening procedure using one number lower than each number of your combination. Also try one number higher than each number. Example: 20-60-40, dial 19-59-39 and 21-61-41. If either sequence of numbers operates your lock, change your instruction sheet accordingly.
Operate the combination lock immediately several times with the door open to become familiar with it. Don't spin the dial under any circumstances. Always rotate the dial slowly, and make certain you stop the dial exactly on the number called for by the combination. If you pass a number mark, start over from the beginning. Never use force on the lock. Your combination lock has been carefully tested and inspected. Combination operating problems are rare. If your Mesa Safe opens after difficulty in operating the lock, DO NOT RE-LOCK THE SAFE. Please contact ArmoryBox.com at 844.276.6792 for assistance. Available Monday - Friday 9am to 7pm and Saturday from Noon to 5pm [Eastern Standard Time] or email us at customersupport@armorybox.com
After warranty, we recommend the lock be serviced by a qualified locksmith every two years.
Locking Your Safe:
To lock, turn dial to the Left at least 4 revolutions. Always make sure your safe is locked & secured.